飞极速下载站:无毒、绿色、无插件的专业下载站! 飞极速|最近更新|专题集合|标签云|站内导航
银灿科技量产工具(InnostorMPTool)v2.11.02.11绿色版下载

银灿科技量产工具(InnostorMPTool)v2.11.02.11绿色版下载

  • 软件大小:14.87 MB
  • 更新日期:2020-06-02 14:45:41
  • 软件语言:简体中文
  • 软件类别:软件下载
  • 软件授权:免费版
  • 评分等级:
  • 插件情况:无插件请放心使用
  • 软件官网:http://www.diyihxt.com
  • 适用平台:Win All
本地下载文件大小:14.87 MB 高速下载高速下载器,提速50%
软件介绍 人气软件 相关文章 下载地址

银灿科技量产工具(InnostorMPTool)v2.11.02.11绿色版下载,飞极速下载站为大家带来专业的软件下载下载服务,银灿科技量产工具(InnostorMPTool)v2.11.02.11绿色版下载,它的大小是14.87 MB,欢迎下载使用。

银灿科技量产工具(Innostor MPTool)是一款功能强大的量产工具,无论是企业还是个人,都可以利用银灿科技量产工具进行U盘量产工作,软件使用起来简单好用,有需要的可以下载使用。

银灿科技量产工具(Innostor MPTool)

基本简介

U盘量产即U盘批量生产的意思。在U盘出厂时候最后一道工序是量产。而现实中,水货U盘,或者需要制作带CD-ROM盘的U盘,方便u盘装系统,也用到量产。

而量产需要识别U盘的主控方案。也就是芯片方案。一般使用ChipGenius软件查看,并且对应的下载相关量产工具。当然提醒大家的是尽量买原厂正品U 盘。芯片在量产之前首先要确定的就是自己U盘的主控芯片,确定之后才能找到合适的量产工具。主控芯片的分类有:群联、慧荣、联阳、擎泰、鑫创、安国、芯 邦、联想、迈科微、朗科、闪迪。这些是可以通过ChipGenius检测出的。

软件特色

1、USB-FDD (软盘模式): 启动后U盘的盘符是A,且容量只有1.44MB,至于FDD早就已经退出历史舞台了;

2、USB-ZIP(大软盘模式): 启动后U盘的盘符是A;USB-ZIP大容量软盘仿真模式,此模式在一些比较老的电脑上是唯一可选的模式,但对大部分新电脑来说兼容性不好,特别是大容量 U盘。FlashBoot制作的USB-ZIP启动U盘即采用此模式。USB-ZIP+增强的USB-ZIP模式,在DOS启动后显示A:盘,有些显示 C:盘(根据电脑的BIOS支持情况不同),支持USB-ZIP/USB-HDD双模式启动,从而达到很高的兼容性。其缺点在于有些支持USB-HDD的 电脑会将此模式的U盘认为是USB-ZIP来启动,从而导致4GB以上大容量U盘的兼容性有所降低。

3、USB-HDD (硬盘模式): 启动后U盘的盘符是C。(注意:这个模式在安装系统时容易混淆U盘和硬盘的C分区);USB-HDD硬盘仿真模式,此模式兼容性很高,但对于一些只支持 USB-ZIP模式的电脑则无法启动。HPUSBFW工具制作的U盘即采用此启动模式。USB-HDD+增强的USB-HDD模式,DOS启动后显示C: 盘,兼容性高于USB-HDD模式。同样对仅支持USB-ZIP的电脑无法启动。

4、USB-CDROM(光盘模式): 启动后U盘的盘符是光驱盘符。USB-CDROM光盘仿真模式,DOS启动后可以不占盘符,兼容性比较高,新老主板一般都可以。优点可以像光盘一样使用 (如,进行Windows系统安装)。缺点,我们将失去对这部分U盘空间的写权利,剩余空间会被识别成为一个独立的U盘,可以为Removable盘,当 然也可以做成Fixed盘,进一步分区;

注意事项

错误代码说明:

11:"Open Execute File error!";

12:"Can't support NAND Function!";

13:"Send Execute CMD fail!";

14:"Check busy after Send Execute CMD!";

15:"Can't support NFTL Function!";

16:"Device Setup already, please erase first!";

17:"Can't support LED Function!";

18:"Check busy after Execute step!";

19:"Send GetMap CMD fail!";

20:"Return Channel not match!";

21:"Return Bank not match!";

22:"Return SizeofIDCode not match!";

23:"Return Flash ID not match!";

24:"Check busy after TestGetMap Step!";

25:"TestConfig Send IODriving_CMD fail!";

26:"TestConfig Send SET_ECC_CMD fail!";

27:"TestConfig Send SET_ACTiming_CMD fail!";

28:"TestConfig Send ConfigDevice_CMD fail!";

29:"TestConfig Send ConfigDevice_CMD fail!";

30:"Check busy after Send ConfigDevice_CMD!";

31:"Check busy after Test Config Step!";

32:"TestScanINIDFT Send CMD fail!";

33:"Check busy after TestScanINIDFT Step!";

34:"TestReadPhysical Send CMD fail!";

35:"TestCopy Send Init_NFTL CMD fail!";

36:"Check busy after Initial NFTL!";

37:"TestCopy Write fail!";

38:"TestCopy Read fail!";

39:"TestCopy RW Compare fail!";

40:"Check busy after TestReadPhysical Step!";

41:"TestErase Send CMD fail!";

42:"Check busy after TestErase!";

43:"Open USB FW File error!";

44:"Open SATA FW File error!";

45:"Send Write FW/Info CMD fail!";

46:"Check busy after Send Write FW/Info CMD!";

47:"Send Read FW/Info CMD fail!";

48:"Check busy after RW Info and FW!";

49:"Verify Info fail!";

50:"Write Descriptor fail!";

51:"Can't support Partition Function!";

52:"The Supported System IDs is incomplete!";

53:"open Image file fail!";

54:"Set Partition Fail!";

55:"Send Write Partition CMD fail!";

56:"Write CD-ROM partition fail!";

57:"Send ReadCapacity CMD fail!";

58:"Send Init_NFTL CMD fail!";

59:"Send Write Partition CMD fail!";

60:"Check busy after Partition!";

61:"Check busy after Copy Test!";

62:"This Format type not support!";

63:"This Windows version not support!";

64:"Can't get Diskletter!";

65:"Write Label name fail!";

66:"TestFormat fail!";

67:"Check busy after Format!";

68:"TestExecute ReInitial-Erase fail!";

69:"Inquiry Fail!";

70:"Can't Initial device , now run FW!";

71:"Check busy after Re-Initial erase Fail!";

72:"TestExecute Stop NFTL fail!";

73:"Send LEDC CMD fail!";

74:"TestFormat verify BPB fail!";

75:"Lock Disk fail!";

76:"UnLock Disk fail!";

77:"Get lock handle fail!";

78:"Get Total Sectors fail!";

79:"Open PC FW File error!";

80:"TestReadPhysical bad block over default setting!";

81:"TestReadPhysical Info-Block is bad!";

82:"Execute File not found!";

83:"TestReadPhysical Total size not enough!";

84:"TestReadPhysical Get total block too much!";

85:"TestFormat Create MBR error!";

86:"TestFormat Verify MBR fail!";

87:"Read Capacity fail!";

88:"Enable Optitmize for Performance fail!";

89:"Relink drive fail!";

90:"Disk size small than Media Partition!";

91:"Disk size small than Force capacity!";

92:"Can't support TEPF Function!";

93:"Refresh device fail!";

94:"Send Terminate CMD fail!";

95:"Check Unit Ready Timeout!";

96:"Innostor unlock CMD fail!";

97:"Innostor lock CMD fail!";

98:"Get Serial number fail!";

99:"Can't find good block to write FW!";

100:"Can't find good block to write Info!";

101:"TestConfig CT value error!";

102:"Hidden size incorrect!";

103:"Preload File Fail!";

104:"Can not find default Stor-String!";

105:"Write Info-Table fail!";

106:"Get Parameter fail!";

107:"Get Flash vendor fail!";

108:"Get Driving setting fail!";

109:"Can not Get File system!";

110:"Check Innostor device fail!";

111:"Check Preload files fail!";

112:"Cluster size not match!";

113:"Serial number over setting!";

114:"Not support ISF!";

115:"Set Permissions fail!";

116:"Can not support this version OS!";

117:"Not support this controller!";

118:"Support ISF Only!";

119:"Bad Block too much!";

120:"Serial number length not match!";

121:"Set parameter fail!";

122: "Device size over range!";

300:"SORTING_INVALID_HANDLE!";

301:"SORTING_SUCCESS!";

302:"SORTING_EVENT_FUNCTION_FAIL!";

303:"SORTING_STATUS_FUNCTION_FAIL!";

304:"SORTING_SET_PARAMETER_FAIL!";

305:"SORTING_GET_PARAMETER_FAIL!";

306:"SORTING_SET_PATTERN_FAIL!";

307:"SORTING_SET_TABLE_FAIL!";

308:"SORTING_ERASE_FAIL!";

309:"SORTING_WRITE_FAIL!";

310:"SORTING_READ_COMPARE_FAIL!";

311:"SORTING_GET_RESULT_FAIL!";

312:"SORTING_NOT_TLC_FALSH!";

313:"SORTING_FLASH_POWER_ONOFF_FAIL!";

314:"SORTING_SET_FEATURE_FAIL!";

315:"SORTING_SET_BMT_FAIL!";

316:"SORTING_BAD_BLOCKS_TOO_MUCH!";

317:"SORTING_NOT_SUPPORT_MULTI_CHANNEL_MULTI_BANK!";

318:"SORTING_SORTING_DATA_LENGTH_MISMATCH!";

319:"SORTING_SORTING_SET_ALPHA_TABLE_FAIL!";

320:"SORTING_VERIFY_IDBT_FAIL!";

321:"SORTING_QUICK_PARAMETER_FAIL!";

322:"SORTING_SORTING_INVLIAD_SORTING_LEVEL!";

以上内容就是银灿科技量产工具(InnostorMPTool)v2.11.02.11绿色版下载的相关介绍,如果使用过程中遇到问题可以联系飞极速下载站客服反馈。

下载地址

银灿科技量产工具(InnostorMPTool)v2.11.02.11绿色版下载

高速下载器地址:

如不能下载请联系飞极速管理员!
下载周排行 下载总排行